Send Email
Send SMS
Avi Sales Corporation
Avi Sales Corporation

Home »

Press Tool Die & Plastic Mold Components

AVI Sales Corporation is engaged in manufacturing and trading an extensive assortment of Die & Mould Components across the India

Codipro Eye Bolts and Swivel RingsGet Quotation
We are the authorised Distributor of CODIPRO for India.

  • Manufactured according to the EN 1677-1 standard
  • Material health tested according to current European standards
  • Breaking test on samples from each batch according to current European standards
  • Proof load test with WLL x 2.5 according to current European standards
  • Approval by an external inspection organisation possible
  • Traceability ensured by our Quality Service Department
  • Fabrication mark on the axes and shackles
  • Shipping with certificate of conformity

Yes! I am interested

ISO Standard - Compression SpringGet Quotation
Advantages of ISO Standard Spring

  • Organized load range in stable which makes ISO springs more reliable and convenient.
  • Set up original regulation on load as ±10% tolerance at maximum load setting (200,000 times)
  • Indication of durability on the catalogue makes customer to use our products safely and maintenance free.

ISO standard Springs-

Electrophoretic coating Oil tempered wire for mechanical spring − 30℃ 〜 150℃

  • TJL- Light load –Green.
  • TJM- Medium load -Blue,
  • TJH- Heavy load-Red
  • TJB -Extra heavy load- Yellow

ISO Standard

Model Type Maximum deflection
TJL Light load 40.00%
TJM Medium load 37.50%
TJH Heavy load 30.00%
TJB Extra heavy load 25.00%

Yes! I am interested

JIS Standard - Compression SpringGet Quotation

JIS Standard springs we developed contribute to reducing the entire die size by adopting flat lines and also standardized springs as die parts in our excellent product line. These are now trusted by users as standard products for press dies.



Maximum deflection


Lightest load



Light load



Medium load



Heavy load



Extra heavy load


Yes! I am interested

Plastic Mold ComponentsGet Quotation

AVI SALES CORPORATIONis here to make your job easier, faster and more profitable every step of the way. That’s why we deliver a variety of mold components that maximize the efficiency of your molding operations.

We provide thousands ofhigh-performance,andapplications-engineeredsolutions that let you spend more time on valuable cavity work. All the while, you can rest assured that our products are backed by a long-standing tradition of rigorous quality systems that provide you with a100% satisfaction guarantee.

Yes! I am interested

Self Lubricating ElementsGet Quotation

We manufacture copper-based bearings and guide elements with solid lubricant deposits called "MFA“.

Properties :

  • High Wear Resistance
  • Excellent Sliding.


  • With high loads and low speed
  • When oil or grease lubrication are not desired or not available.

Mode of operation:

  • Deposits (boreholes or groves) of solid lubricant are distributed with a proportion from 25% to 35% in the sliding surface of the base material.
  • The overlapping geometrical distribution of the deposits assures the lubrication of the entire surface.
  • During operation, a compact adhesive lubricating layer forms on the sliding surfaces, reducing direct solid state contact to a minimum and protecting the sliding counterpart.
  • Our lubricants contain effective friction and wear reducing elements, as well as corrosion protecting supplements.
  • Metallic abrasion and impurities penetrating into the sliding area are absorbed by the deposits, avoiding greater damage to the sliding surfaces.
  • The friction in MFA bearings is influenced by operating conditions, material, roughness, as well as the hardness of the sliding counterpart. The coefficient of friction ranges from 0,04 to 0,12, reaching the upper boundary towards the end of service life.
  • The temperature range of MFA standard elements extends from -50°C to 150°C. Special designs with wider temperature ranges (up to 200°C) are available on request.
  • The friction occurring in MFA-bearings is influenced by material, roughness and hardness of the sliding counterpart, as well as from the operating data. The coefficient of friction lies in the range of 0,06 ≤f ≤0,12 with upper boundary tendency towards the end of service life.

Yes! I am interested

Call Us: +91-8079465125
Avi Sales Corporation
Shrinivas (Proprietor)
Shop No. 6, Morya Industrial Complex T - 201 / 1, M. I. D. C. Bhosari,
Pune - 411026, Maharashtra, India
Contact via E-mail
Contact via SMS

Home  |   About Us   |  Product Range  |  Site Map  |   Contact Us   |   Mobile Site

© Avi Sales Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Avi Sales Corporation